SERVICE OFFERING
Professional key fob programming, immobilizer learning, and transponder cloning powered by the Autel MaxiIM KM100. Coverage for 700+ vehicle models across 80+ brands worldwide.
Locked out? Lost your only key? Need a spare? I provide a full range of automotive key services using professional-grade Autel equipment.
Need an extra key fob for a family member or backup? Fast OBD-based programming for most modern vehicles. Bring your existing key and the new blank.
Lost every key to your vehicle? I can perform "all-keys-lost" immobilizer learning on supported vehicles, generating brand new keys via OBD or bench programming.
Read, write, and clone transponder chips (ID4D, ID46, ID47, ID48, ID4A, ID49, Megamos, Hitag, and more) for fast, reliable duplication.
Push-to-start smart keys and traditional remote fobs alike. Frequency detection (315 / 433 / 868 / 915 MHz) and remote learning for keyless entry.
Diagnose dead remotes by testing the actual RF frequency output and verifying ignition coil signal. Find out if it's the fob or the car before you spend money.
Auto VIN scan to identify your vehicle's exact key system and immobilizer type. No guessing — you get the right fob and the right procedure the first time.
Search the full Autel MaxiIM KM100 supported vehicle list. Filter by make, search by model, and check the IMMO type and supported programming method for your car.
| Make | Model | Year Range | IMMO / Key System | Method |
|---|
Don't see your vehicle? Coverage is updated regularly — contact me with your year, make, and model and I'll confirm.
Search your vehicle in the list above or send me your year, make, and model. I'll confirm support and quote the right blank fob.
For "add-key" jobs, bring at least one working key. For "all-keys-lost", bring the title and ID. Most jobs are completed on-site.
I plug into your OBD port (or pull the immobilizer module if needed), program the new fob, and verify start, lock, unlock, and panic functions.
You leave with a fully working key, much faster and cheaper than the dealer. Most jobs done in 30–60 minutes.
Simple, transparent pricing and clear policies so you know exactly what to expect before you book.
Flat rate · up to 4 keys per vehicle · OBD-listed vehicles only
No payment until the job is 100% complete. No deposits, no upfront fees.
If your vehicle shows up in the search above with an OBD badge, I can program it. Bench-only vehicles require module removal and aren't part of this service.
Every working key for the vehicle has to be at the appointment so it can be re-learned alongside the new ones. Lost a key? No worries — it simply won't be added during programming and will no longer work with the vehicle after.
I can program a key you've already purchased, as long as it's similar/compatible to the one that originally came with the car.
I don't take any money until the keys are fully programmed and verified working — start, lock, unlock, and panic functions all confirmed before payment.
This service is 100% legal in the state of Tennessee with proper insurance and licensing. Proof of ownership is required on every vehicle before any work begins — current title, valid photo ID, and matching registration.
I only work on vehicles that are open or accessible with a physical key. If you're locked out, you'll need a locksmith to gain entry first — then I can handle the programming.
I program the chip and transponder so the car will start; I don't cut the physical blade. After programming, take your keys to a hardware store like Ace Hardware or Home Depot to have the blade cut so they can also physically open the door if your fob battery ever dies.
The Autel KM100 has limited coverage on BMW (CAS3+/CAS4/FEM/BDC) and Mercedes-Benz vehicles. These usually require bench/EEPROM work or a higher-tier programmer. Contact me first to confirm.
Newer GM vehicles (2020+ Silverado, Sierra, Escalade etc.) using the CAN-FD protocol may not be supported. We can verify with your VIN before scheduling.
Good news: I now support a wide range of Toyota and Lexus vehicles via the Autel KM100 over OBD — Camry, Corolla, RAV4, Highlander, Tacoma, Tundra, 4Runner, Prius, Sienna, plus most Lexus ES/IS/RX/NX/GX/LX models. Add-key jobs require a working master/H-key. For all-keys-lost on smart-key Toyota/Lexus, contact me first — some still need bench programming.
Most Mercedes-Benz models are not supported by the KM100. For those vehicles I'd recommend a dealer or a locksmith with a Mercedes-specific tool (Autel IM608, AVDI, etc.).
For "all-keys-lost" jobs I require a current vehicle title, valid photo ID, and registration matching the address. This protects everyone involved.
Send me your year, make, model, and what you need (spare key, remote programming, transponder cloning, etc.) and I'll get you a quote. Remember — I program keys, I don't cut them. After programming, take your keys to a hardware store like Ace Hardware or Home Depot to have the blade cut.